| PAGE | NUMBER | DATE | TYPE | DETAIL 2 | LENGTH | BLADE | WIDTH | THICK | GRIND | MATERIAL | DETAIL 3 | TANG | HANDLE | NOTES |
| 560 | 2756 | 850 - 900 | seax | long diagonal | 23 | 13 | 3 | 0.6 | V | pattern weld | flat taper | |||
| 560 | 2761 | 850 - 900 | seax | long diagonal | 6.5 | 1.8 | 0.4 | V | flat taper | bevel at back | ||||
| 560 | 2763 | 850 - 900 | seax | long diagonal | 8 | 1.6 | 0.4 | V | flat taper | grooved | ||||
| 560 | 2764 | 850 - 900 | seax | long diagonal | 8.5 | 1.6 | 0.4 | V | flat taper | grooved | ||||
| 560 | 2767 | 850 - 900 | drop point | edge straight | 8 | 1.2 | 0.5 | V | butt weld edge | thin strip | wide flat taper | |||
| 560 | 2772 | 850 - 900 | drop point | edge straight | 8 | 1.4 | 0.3 | V | wide flat taper | 3 x grooves | ||||
| 561 | 2773 | 850 - 900 | drop point | edge straight | 7 | 1.4 | 0.3 | V | wide flat taper | |||||
| 561 | 2776 | 850 - 900 | drop point | midline point | 7 | 1 | 0.3 | V | wide flat taper | bevel at back | ||||
| 561 | 2783 | 850 - 900 | drop point | midline point | 6.5 | 1.6 | 0.4 | V | wide flat taper | |||||
| 562 | 2798 | c 930 - 935 | seax | taper up to clip | 11 | 6.5 | 2.2 | 0.3 | V | piled back | 4 x same metal | wide flat taper | 1.8 cm at hilt | |
| 562 | 2799 | c 930 - 935 | seax | taper up to clip | 20.5 | 10 | 2.2 | 0.4 | V | flat taper | 2 at hilt, curved lines on back | |||
| 562 | 2800 | c 930 - 935 | clip point | point above midline | 14 | 9 | 1.2 | 0.4 | V | carbon varies | hardest to edge | flat taper | curved false edge | |
| 562 | 2801 | c 930 - 935 | drop point | midline point | 13 | 9 | 1.6 | 0.5 | V | steel core | iron slab sides | straight rectangle | wide fuller | |
| 563 | 2808 | c 930 - 975 | seax | slight lift to point | 15 | 3.3 | 0.8 | V | steel core | iron slab sides | fuller + groove, curved false edge | |||
| 566 | 2810 | c 930 - 975 | straight back | slight drop to point | 10 | 2 | 0.3 | Y | wide flat taper | long curve to edge | ||||
| 566 | 2811 | c 930 - 975 | clip point | point above midline | 19 | 3.3 | 0.4 | sabre | flat taper | curved false edge, taper up to clip | ||||
| 566 | 2812 | c 930 - 975 | drop point | point above midline | 19 | 8.5 | 1.6 | 0.3 | V | flat taper | oval | long curve to edge, handle carved | ||
| 566 | 2826 | c 930 - 975 | straight back | slight drop to point | 15 | 1.8 | 0.3 | V | straight rectangle | long curve to edge | ||||
| 567 | 2833 | c 930 - 975 | straight back | slight drop to point | 16 | 8 | 1.3 | 0.4 | sabre | square, slight taper | cylinder sections | |||
| 567 | 2837 | c 930 - 975 | drop point | midline point | 14 | 7.5 | 1.4 | 0.4 | sabre | thickest before point | ||||
| 568 | 2860 | c 930 - 975 | drop point | midline point | 15 | 7 | 1.8 | 0.4 | V | inset steel | 2 + V insert | ofset to edge, taper | fuller, both sides long curve | |
| 569 | 2876 | c 975 | seax | curved back | 6 | 1.2 | 0.6 | V | knotches cut along back | |||||
| 569 | 2892 | c 975 | seax | taper up to clip | 12.5 | 1.1 | 0.5 | V | pattern weld | 3 + 3 on core | long diagonal to clip | |||
| 569 | 2895 | c 975 | seax | taper up to clip | 8 | 2.2 | 0.3 | V | curves up to midline | |||||
| 569 | 2907 | c 975 | straight back | slight drop to point | 19 | 10.5 | 1.6 | 0.4 | sabre | wide flat taper | ||||
| 569 | 2909 | c 975 | drop point | point above midline | 16.5 | 8 | 1.8 | 0.4 | V | flat taper | tear drop | tang buried in handle (no peen) |